Description
TOPDON T-Ninja Box – key and immobiliser programmer for TOPDON Phoenix
Programming keys, all keys lost, a replaced engine or gearbox ECU: jobs like these need more than OBD diagnostics. The TOPDON T-Ninja Box (TNJ Box) works together with TOPDON Phoenix diagnostic tools and reads and writes key chips, EEPROMs, MCUs and control units – via OBD or in bench mode directly on the removed control unit.
A good fit if you …
- already work with a TOPDON Phoenix diagnostic tool
- programme keys or create new ones when all keys are lost
- replace or clone engine and gearbox ECUs on VW, Audi, BMW or Mercedes-Benz
- want to work on control units on the bench
Probably not for you if you …
- use a LAUNCH X-431 – the LAUNCH X-PROG 3 is designed for that
- don’t have a diagnostic tool – the T-Ninja Box does not work on its own
Immobiliser and keys
- ImmobiliserProgramme and adapt immobilisers
- KeysRead and write key chips, generate new and special keys
- Audi 4th generationReplace EZS, comfort control unit and KESSY – even when all keys are lost
- Mercedes-BenzMatch infrared keys
- IMMO systemsEngine, automatic gearbox, CAS, body and locking system
Reading, writing and cloning control units
- VW UDS 4th generationRead and write engine ECUs
- VW / Audi MQBReplace engine and gearbox control units
- Audi 5th-generation gearboxReplace the gearbox control unit
- CloningClone engine and gearbox control units; according to TOPDON, also copy FDCT and 9-speed gearbox control units
- Bench modeAccording to TOPDON, more than 170 Bosch and 20 Siemens engine ECUs plus 20 gearbox ECUs
- Chip manufacturersIncluding Atmel, ST, Microchip, Renesas and NEC
Which functions are available for your vehicle depends on make, model, year and control unit.
Technical data
| Device type | Key and immobiliser programmer (add-on device) |
|---|---|
| Compatible with | TOPDON Phoenix diagnostic tools |
| Vehicle coverage | European, Asian and US models, including VW, Audi, Škoda, Seat, BMW, Mercedes-Benz, Toyota |
| Chips | EEPROM, MCU, ECU |
| Operating modes | OBD and bench mode |
| Warranty | 1-year manufacturer’s warranty |
What’s in the box
- T-Ninja Box main unit
- MCU cable V1 and MCU 2 cable
- INS cable V1 and V2
- Bench mode cable
- EEPROM adapter
- MB adapter
- Adapter sets A, B, C, D and E
- Switch-mode power supply
- User manual
Good to know
Immobiliser and key work is only permitted on your own vehicle or on behalf of the registered keeper. Ask to see the customer’s vehicle registration document and ID before every job.
Always back up the original control unit or EEPROM data before writing. For work via OBD, connect the vehicle to a battery charger or power supply so that the on-board voltage doesn’t drop during the write process.
Will the T-Ninja Box work on your vehicle?
Tell us your Phoenix model, the make, model, year and the function you need – we’ll check before you buy.
Questions we often get
Does the T-Ninja Box work without a diagnostic tool?
No, the T-Ninja Box is an add-on device and is operated via a TOPDON Phoenix diagnostic tool.
What’s the difference from the LAUNCH X-PROG 3?
Both devices cover similar tasks. The T-Ninja Box works with TOPDON Phoenix tools, the X-PROG 3 with LAUNCH X-431 tools. So it comes down to which diagnostic tool you have.
What does bench mode mean?
In bench mode, the removed control unit is connected directly on the bench using the bench mode cable and then read or written.
Can I programme keys when all keys are lost?
Yes, depending on the vehicle – for example on 4th-generation Audi by replacing the EZS, comfort control unit or KESSY.
What warranty does the device have?
The T-Ninja Box comes with a 1-year manufacturer’s warranty.
















Reviews
There are no reviews yet.