Description
TOPDON Phoenix 4-channel oscilloscope – 100 MHz measurement for TOPDON Phoenix diagnostic tools
A fault code tells you where the problem is, but not always why. Whether the crankshaft sensor switches cleanly, an injector is driven correctly or the CAN bus is disturbed only shows up in the waveform. The TOPDON Phoenix 4-channel oscilloscope connects to your Phoenix diagnostic tool and displays up to four signals at once – with 100 MHz bandwidth, CAN and LIN decoding and ready-made test presets for sensors, actuators and ignition.
A good fit if you …
- already use a TOPDON Phoenix diagnostic tool
- want to check sensors, actuators and ignition by their waveforms
- want to compare signals, such as crankshaft and camshaft sensors at the same time
- want to decode CAN and LIN communication
Probably not for you if you …
- don’t have a Phoenix tool – the oscilloscope is operated via the Phoenix
- only read fault codes and do service resets
What workshops use the oscilloscope for
- SensorsCrankshaft and camshaft sensors, lambda sensors, wheel speed sensors, pressure sensors
- ActuatorsInjectors, solenoid valves, servo motors, throttle body
- IgnitionCheck ignition signals and compare cylinders
- CommunicationMeasure and decode CAN and LIN bus
- CircuitsCheck supply, earth and signal lines under load
- Combination testsDisplay several signals at once, such as crank and cam for valve timing
Functions
- Test presetsPresets for circuit, sensor, actuator, ignition, communication and combination tests
- 23 auto measurementsSelect readings and show them on one screen
- TriggersEdge and pulse width, Normal, Auto and Single modes
- CursorsHorizontal and vertical cursors for reading time and voltage
- MathsAdd, subtract, multiply and divide two channels, FFT
- SavingSave waveforms with one tap, recall them as reference and store settings as configurations
Technical data
| Channels | 4 |
|---|---|
| Bandwidth | 100 MHz |
| Sampling rate | 1 GSa/s (1 channel), 500 MSa/s (2 channels), 250 MSa/s (4 channels) |
| Memory depth | 50 M, shared across 4 channels |
| Protocol decoding | CAN, LIN |
| Vertical sensitivity | 5 mV to 10 V per division |
| Time base | 50 ns to 1000 s |
| Vertical accuracy | ±3 % |
| Input impedance | 1 MΩ ±1.5 % |
| Display modes | YT, Zoom, Roll |
| Connection | USB, powered via USB or DC |
| Compatible with | TOPDON Phoenix Max, Elite, Smart, Lite 2 and Plus |
| Warranty | 2 years according to TOPDON |
Technical data according to TOPDON. Test leads, clamps and probes are included.
Will the oscilloscope work with your Phoenix?
Tell us your Phoenix model – we’ll check compatibility before you buy.
Questions we often get
Does the oscilloscope work without a Phoenix tool?
No, the oscilloscope connects via USB to a compatible TOPDON Phoenix diagnostic tool and is operated from it.
Which Phoenix tools is it compatible with?
With the Phoenix Max, Elite, Smart, Lite 2 and Plus. For other models, please ask us first.
Can I use it to check the CAN bus?
Yes, the oscilloscope measures and decodes CAN and LIN signals.
Why does the sampling rate drop with more channels?
The 1 GSa/s sampling rate is shared across the active channels: 500 MSa/s with two and 250 MSa/s with four channels. That’s usually plenty for vehicle signals.












Reviews
There are no reviews yet.