TOPDON Phoenix 4-Channel Oscilloscope 100 MHz for Phoenix Diagnostic Tools

454,16 €

  • 4-channel oscilloscope for TOPDON Phoenix Max, Elite, Smart, Lite 2 and Plus
  • 100 MHz bandwidth, up to 1 GSa/s, 50 M memory depth
  • CAN and LIN decoding, FFT and channel maths
  • Test presets for sensors, actuators, ignition and communication
  • Test leads, clamps and probes included

27 in stock

Questions about compatibility? Our technical support helps before you buy. Contact support
GTIN: 04262481670493 SKU: 1126 Categories: , Brand:

Description

TOPDON Phoenix 4-channel oscilloscope – 100 MHz measurement for TOPDON Phoenix diagnostic tools

A fault code tells you where the problem is, but not always why. Whether the crankshaft sensor switches cleanly, an injector is driven correctly or the CAN bus is disturbed only shows up in the waveform. The TOPDON Phoenix 4-channel oscilloscope connects to your Phoenix diagnostic tool and displays up to four signals at once – with 100 MHz bandwidth, CAN and LIN decoding and ready-made test presets for sensors, actuators and ignition.

A good fit if you …

  • already use a TOPDON Phoenix diagnostic tool
  • want to check sensors, actuators and ignition by their waveforms
  • want to compare signals, such as crankshaft and camshaft sensors at the same time
  • want to decode CAN and LIN communication

Probably not for you if you …

  • don’t have a Phoenix tool – the oscilloscope is operated via the Phoenix
  • only read fault codes and do service resets

TOPDON diagnostic tools and accessories

What workshops use the oscilloscope for

  • SensorsCrankshaft and camshaft sensors, lambda sensors, wheel speed sensors, pressure sensors
  • ActuatorsInjectors, solenoid valves, servo motors, throttle body
  • IgnitionCheck ignition signals and compare cylinders
  • CommunicationMeasure and decode CAN and LIN bus
  • CircuitsCheck supply, earth and signal lines under load
  • Combination testsDisplay several signals at once, such as crank and cam for valve timing

Functions

  • Test presetsPresets for circuit, sensor, actuator, ignition, communication and combination tests
  • 23 auto measurementsSelect readings and show them on one screen
  • TriggersEdge and pulse width, Normal, Auto and Single modes
  • CursorsHorizontal and vertical cursors for reading time and voltage
  • MathsAdd, subtract, multiply and divide two channels, FFT
  • SavingSave waveforms with one tap, recall them as reference and store settings as configurations

Technical data

Channels 4
Bandwidth 100 MHz
Sampling rate 1 GSa/s (1 channel), 500 MSa/s (2 channels), 250 MSa/s (4 channels)
Memory depth 50 M, shared across 4 channels
Protocol decoding CAN, LIN
Vertical sensitivity 5 mV to 10 V per division
Time base 50 ns to 1000 s
Vertical accuracy ±3 %
Input impedance 1 MΩ ±1.5 %
Display modes YT, Zoom, Roll
Connection USB, powered via USB or DC
Compatible with TOPDON Phoenix Max, Elite, Smart, Lite 2 and Plus
Warranty 2 years according to TOPDON

Technical data according to TOPDON. Test leads, clamps and probes are included.

Will the oscilloscope work with your Phoenix?

Tell us your Phoenix model – we’ll check compatibility before you buy.

Ask on WhatsApp

Questions we often get

Does the oscilloscope work without a Phoenix tool?

No, the oscilloscope connects via USB to a compatible TOPDON Phoenix diagnostic tool and is operated from it.

Which Phoenix tools is it compatible with?

With the Phoenix Max, Elite, Smart, Lite 2 and Plus. For other models, please ask us first.

Can I use it to check the CAN bus?

Yes, the oscilloscope measures and decodes CAN and LIN signals.

Why does the sampling rate drop with more channels?

The 1 GSa/s sampling rate is shared across the active channels: 500 MSa/s with two and 250 MSa/s with four channels. That’s usually plenty for vehicle signals.

Reviews

There are no reviews yet.

Be the first to review “TOPDON Phoenix 4-Channel Oscilloscope 100 MHz for Phoenix Diagnostic Tools”