Description
Autel PowerScan PS100 – automotive circuit tester with voltage, current and resistance measurement
A bulb that won’t light, a fan that won’t run, a fuse that keeps blowing – with electrical faults a fault code won’t help, you need to measure right at the wiring. The Autel PowerScan PS100 connects to the vehicle battery and shows voltage, current and resistance on a colour display. With the switch you power components directly with positive or earth – so you can test motors, relays and bulbs without removing them.
A good fit if you …
- track down electrical faults on cars, vans or trucks with 12 or 24 V
- want to activate components such as fans, pumps, actuators or bulbs directly
- want to find earth faults, open circuits and short circuits quickly
- need to reach the boot or underneath the vehicle – thanks to the 6 m lead
Probably not for you if you …
- want to measure on high-voltage systems in electric or hybrid vehicles
- need to see sensor or bus signal waveforms – that requires an oscilloscope
What the PS100 tests
- MeasuringRead voltage (V), current (A) and resistance (Ω) directly on the display
- Voltage and earthVoltage, earth and polarity tests, poor earth connections are indicated
- Activate componentsSwitch positive or earth through, for example to test motors, relays or bulbs
- ContinuityCheck wiring for open circuits
- Short circuitLocate short circuits in wiring and circuits
- Test lightAlso usable as a test light and torch
Technical data
| Display | TFT colour display, 160 × 128 pixels |
|---|---|
| Power supply | 12–24 V from the vehicle battery |
| Measuring functions | Voltage, current, resistance |
| Test lead | approx. 6 m extension cable |
| Operating temperature | 0 °C to 60 °C |
| Dimensions | 126 × 46.5 × 35 mm |
| Weight | 105 g (unit), 726 g complete with case |
What’s in the box
- Autel PowerScan PS100
- Test probe
- Extension cable, approx. 6 m
- Cigarette lighter adapter cable
- Battery clamps
- Storage case
- User manual (English)
Good to know
Do not power airbag components, ECUs or sensitive sensors directly with battery voltage – this can damage or trigger them. Check the wiring diagram first to see which component you are activating.
Questions about the PS100?
Tell us which faults you’re tracking down – we’re happy to advise.
Questions we often get
Does the PS100 need its own battery?
No, it is powered with 12 or 24 V from the vehicle via the battery clamps or the cigarette lighter.
Does the PS100 work on trucks?
Yes, it works with 12 and 24 V electrical systems. It must not be used on high-voltage systems in electric and hybrid vehicles.
What’s the difference from a standard test light?
The PS100 shows voltage, current and resistance as measured values and can activate components with positive or earth. A simple test light only shows whether voltage is present.
Is the manual in English?
Yes, the included user manual is in English.










Reviews
There are no reviews yet.