utel PowerScan PS100 – Automotive Circuit Tester 12/24 V with Voltage, Current & Resistance Measurement

183,02 €

  • Read voltage, current and resistance directly on the colour display
  • Activate components with positive or earth – without removing them
  • Earth, polarity, continuity and short-circuit testing
  • For 12 and 24 V systems, powered from the vehicle battery
  • 6 m test lead, test probe, battery clamps and case included

90 in stock

Questions about compatibility? Our technical support helps before you buy. Contact support

Description

Autel PowerScan PS100 – automotive circuit tester with voltage, current and resistance measurement

A bulb that won’t light, a fan that won’t run, a fuse that keeps blowing – with electrical faults a fault code won’t help, you need to measure right at the wiring. The Autel PowerScan PS100 connects to the vehicle battery and shows voltage, current and resistance on a colour display. With the switch you power components directly with positive or earth – so you can test motors, relays and bulbs without removing them.

A good fit if you …

  • track down electrical faults on cars, vans or trucks with 12 or 24 V
  • want to activate components such as fans, pumps, actuators or bulbs directly
  • want to find earth faults, open circuits and short circuits quickly
  • need to reach the boot or underneath the vehicle – thanks to the 6 m lead

Probably not for you if you …

  • want to measure on high-voltage systems in electric or hybrid vehicles
  • need to see sensor or bus signal waveforms – that requires an oscilloscope

More Autel test equipment

What the PS100 tests

  • MeasuringRead voltage (V), current (A) and resistance (Ω) directly on the display
  • Voltage and earthVoltage, earth and polarity tests, poor earth connections are indicated
  • Activate componentsSwitch positive or earth through, for example to test motors, relays or bulbs
  • ContinuityCheck wiring for open circuits
  • Short circuitLocate short circuits in wiring and circuits
  • Test lightAlso usable as a test light and torch

Technical data

Display TFT colour display, 160 × 128 pixels
Power supply 12–24 V from the vehicle battery
Measuring functions Voltage, current, resistance
Test lead approx. 6 m extension cable
Operating temperature 0 °C to 60 °C
Dimensions 126 × 46.5 × 35 mm
Weight 105 g (unit), 726 g complete with case

What’s in the box

  • Autel PowerScan PS100
  • Test probe
  • Extension cable, approx. 6 m
  • Cigarette lighter adapter cable
  • Battery clamps
  • Storage case
  • User manual (English)

Good to know

Do not power airbag components, ECUs or sensitive sensors directly with battery voltage – this can damage or trigger them. Check the wiring diagram first to see which component you are activating.

Questions about the PS100?

Tell us which faults you’re tracking down – we’re happy to advise.

Contact support

Questions we often get

Does the PS100 need its own battery?

No, it is powered with 12 or 24 V from the vehicle via the battery clamps or the cigarette lighter.

Does the PS100 work on trucks?

Yes, it works with 12 and 24 V electrical systems. It must not be used on high-voltage systems in electric and hybrid vehicles.

What’s the difference from a standard test light?

The PS100 shows voltage, current and resistance as measured values and can activate components with positive or earth. A simple test light only shows whether voltage is present.

Is the manual in English?

Yes, the included user manual is in English.

Additional information

Weight 2 kg

Reviews

There are no reviews yet.

Be the first to review “utel PowerScan PS100 – Automotive Circuit Tester 12/24 V with Voltage, Current & Resistance Measurement”