Description
LAUNCH X-PROG 3 – immobiliser and key programmer for X-431 diagnostic tools
A new key, a replaced engine ECU or a CAS module that no longer cooperates: for jobs like these, OBD diagnostics alone often won’t get you far. The LAUNCH X-PROG 3 connects to a compatible X-431 diagnostic tool and reads and writes key chips, EEPROMs, MCUs and control units. This lets you identify the immobiliser type, programme keys and remotes, read immobiliser data and replace or clone components.
A good fit if you …
- already use a compatible LAUNCH X-431 diagnostic tool
- programme or copy keys, or create new ones when all keys are lost
- replace or clone engine or gearbox ECUs on VW, Audi, BMW or Mercedes-Benz
- want to read and back up EEPROM and MCU data
Probably not for you if you …
- don’t have an X-431 diagnostic tool – the X-PROG 3 does not work on its own
- only read fault codes and do service resets
Immobiliser and keys
- Identify immobiliserDetermine the immobiliser type
- Keys and remotesRead, match and copy key chips, programme remotes
- All keys lostOn VW/Audi with non-35XX instrument clusters via a separate wiring harness, without desoldering the IC
- Mercedes-BenzRead and write infrared keys, calculate the key password
- BMWRead, write and replace CAS4 / CAS4+ and FEM, read the engine ISN
- Audi4th-generation EZS, comfort control unit and KESSY – replacement and all keys lost
Replacing and cloning control units
- VW / Audi engineRead, write and clone 4th-generation (UDS) and 5th-generation Bosch/Siemens engine ECUs
- VW / Audi MQB gearboxReplace or clone the gearbox control unit
- Audi 0AW / 0B5Replace the 5th-generation gearbox control unit
- BMW 8HPProgramme the gearbox control unit of F and G models back to virgin
- BMW SiemensClone and replace engine ECUs
- Mercedes-BenzRemove the password from engine and gearbox control units
- Bosch / SiemensBack up and restore programming data together with a programmer
According to LAUNCH, many engine and gearbox ECUs can be read and written without opening them, and more than 1200 ECU, MCU and EEPROM types are supported. Which functions are available for your vehicle depends on make, model, year and control unit.
Technical data
| Device type | Immobiliser and key programmer (add-on device) |
|---|---|
| Compatible with | X-431 PRO GT, X-431 PRO V4.0, X-431 PRO3 V4.0, X-431 PRO5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII |
| Supported makes | including VW, Audi, Škoda, Seat, BMW, Mercedes-Benz, Toyota |
| Systems | Immobiliser, instrument cluster, CAS, body, locking system, engine, automatic gearbox |
| Chips | EEPROM, MCU, ECU – more than 1200 types according to LAUNCH |
| Warranty | 1-year manufacturer’s warranty |
Good to know
Immobiliser and key work is only permitted on your own vehicle or on behalf of the registered keeper. Ask to see the customer’s vehicle registration document and ID before every job.
Always back up the original control unit or EEPROM data before writing. For work via OBD, connect the vehicle to a battery charger or power supply so that the on-board voltage doesn’t drop during the write process.
Will the X-PROG 3 work on your vehicle?
Tell us your X-431 tool, the make, model, year and the function you need – we’ll check before you buy.
Questions we often get
Does the X-PROG 3 work without a diagnostic tool?
No, the X-PROG 3 is an add-on device and is operated via a compatible LAUNCH X-431 diagnostic tool.
Which X-431 tools is it compatible with?
With the X-431 PRO GT, PRO V4.0, PRO3 V4.0, PRO5, PAD III V2.0, PAD V and PAD VII.
Can I programme keys when all keys are lost?
Yes, depending on the vehicle. On VW/Audi with a non-35XX instrument cluster, for example, via a separate wiring harness without desoldering the chip.
Do I have to open the control unit?
According to LAUNCH, most engine and gearbox ECUs can be read and written without opening them. Some control units and EEPROMs need to be removed.
What warranty does the device have?
The X-PROG 3 comes with a 1-year manufacturer’s warranty.














Reviews
There are no reviews yet.